Package Lamborghini Huracan 2014 Slave.October 2018 "2018 Performante stock, base start, 98 oct."

Current Version (v1.06.0302)

• Add Engine Oil Level Filtered channel and report this to the R8 instrument cluster so oil level can be checked by the driver.
• Add Engine Oil Level High Telltale Threshold. Previously this was hard coded to 100%, but ‘full’ should not be considered overfull.
• Add Huracan Meter Torque Power Scale parameter and transmit torque/power to the instrument cluster (R8 only).
• Fix Engine Efficiency Validate Table method (press L to make sure the table is valid for torque control).
• Fix Fuel Cylinder 6 to 10 Trim Knock reporting -100% sometimes (cosmetic issue).
• Fix very rare corner case miss calculation of Inlet Manifold Pressure Aim. This could cause a slightly noise throttle aim when at 100% pedal.

v1.06.0290

• Fix Cruise Speed setting, a very small error in the set speed could be set.
• Fix Cruise Displayed set speed, was showing 10% of the actual set speed.
• Add ability to use Slave ECU outputs configured in the master ECU (set output to E8xx Output N).
• Fix Purge system could sometimes interfere with the the modelling of Inlet Manifold Pressure.
• Update to master/slave ECU comms.

v1.06.280

• Initial Version